Jak získat informace o hardwaru pomocí příkazu Dmidecode v systému Linux
V tomto článku uvidíme, jak můžeme použít příkaz Dmidecode k načtení informací o hardwaru libovolného systému Linux. Předpokládejme, že pokud chceme upgradovat systém, potřebujeme shromáždit informace jako Paměť, BIOS a CPU atd. S pomocí Dmidecode< zjistíme podrobnosti, aniž bychom museli otevírat šasi systému. Příkaz Dmidecode funguje pro RHEL/CentOS/Fedora/Ubuntu Linux.
Nástroj Dmidecode čte tabulku DMI (někteří říkají SMBIOS) pro načítání dat a zobrazuje užitečné systémové informace, jako jsou podrobnosti o hardwaru, sériová čísla a verze BIOS, procesor atd. ve formátu čitelném pro člověka. Pro spuštění příkazu dmidecode můžete vyžadovat oprávnění root.
1. Základní výstup demidekódu
Níže je ukázkový výstup příkazu Demidecode.
dmidecode 2.11
SMBIOS version fixup (2.31 -> 2.3).
SMBIOS 2.3 present.
45 structures occupying 1642 bytes.
Table at 0x000E0010.
Handle 0x0000, DMI type 0, 20 bytes
BIOS Information
Vendor: Phoenix Technologies LTD
Version: 6.00
Release Date: 12/06/2006
Address: 0xE78A0
Runtime Size: 100192 bytes
ROM Size: 64 kB
Characteristics:
ISA is supported
PCI is supported
PC Card (PCMCIA) is supported
PNP is supported
APM is supported
BIOS is upgradeable
BIOS shadowing is allowed
ESCD support is available
USB legacy is supported
Smart battery is supported
BIOS boot specification is supported
2. Jak získat typy DMI
ID DMI nám poskytuje konkrétní informace o hardwaru systému. Dmidecode s možnostmi „-t „nebo „–type“ a „Id“ nám poskytne přesné informace. ID 6 nám poskytne informace o paměťovém modulu.
[root@tecmint ~]# dmidecode -t 6
dmidecode 2.11
SMBIOS version fixup (2.31 -> 2.3).
SMBIOS 2.3 present.
Handle 0x0009, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: RAM socket #0
Bank Connections: 0 1
Current Speed: Unknown
Type: EDO DIMM
Installed Size: 1024 MB (Single-bank Connection)
Enabled Size: 1024 MB (Single-bank Connection)
Error Status: OK
Handle 0x000A, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: RAM socket #1
Bank Connections: 2 3
Current Speed: Unknown
Type: EDO DIMM
Installed Size: Not Installed
Enabled Size: Not Installed
Error Status: OK
Handle 0x000B, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: RAM socket #2
Bank Connections: 4 5
Current Speed: Unknown
Type: EDO DIMM
Installed Size: Not Installed
Enabled Size: Not Installed
Error Status: OK
Handle 0x000C, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: RAM socket #3
Bank Connections: 6 7
Current Speed: Unknown
Type: EDO DIMM
Installed Size: Not Installed
Enabled Size: Not Installed
Error Status: OK
Níže jsou uvedeny podrobnosti o typech DMI.
Type Information
----------------------------------------
0 BIOS
1 System
2 Base Board
3 Chassis
4 Processor
5 Memory Controller
6 Memory Module
7 Cache
8 Port Connector
9 System Slots
10 On Board Devices
11 OEM Strings
12 System Configuration Options
13 BIOS Language
14 Group Associations
15 System Event Log
16 Physical Memory Array
17 Memory Device
18 32-bit Memory Error
19 Memory Array Mapped Address
20 Memory Device Mapped Address
21 Built-in Pointing Device
22 Portable Battery
23 System Reset
24 Hardware Security
25 System Power Controls
26 Voltage Probe
27 Cooling Device
28 Temperature Probe
29 Electrical Current Probe
30 Out-of-band Remote Access
31 Boot Integrity Services
32 System Boot
33 64-bit Memory Error
34 Management Device
35 Management Device Component
36 Management Device Threshold Data
37 Memory Channel
38 IPMI Device
39 Power Supply
Místo „type_id“ můžete také použít klíčové slovo s argumentem „-t“ v příkazu dmidecode. Následuje seznam dostupných klíčových slov.
Keyword Types
------------------------------
bios 0, 13
system 1, 12, 15, 23, 32
baseboard 2, 10
chassis 3
processor 4
memory 5, 6, 16, 17
cache 7
connector 8
slot 9
Chcete-li například získat informace o Cache v systému, můžete místo ID 7 provést níže uvedený příkaz.
[root@tecmint ~]# dmidecode -t cache
dmidecode 2.11
SMBIOS version fixup (2.31 -> 2.3).
SMBIOS 2.3 present.
Handle 0x000D, DMI type 7, 19 bytes
Cache Information
Socket Designation: L1 Cache
Configuration: Enabled, Socketed, Level 1
Operational Mode: Write Back
Location: Internal
Installed Size: 16 kB
Maximum Size: 16 kB
Supported SRAM Types:
Burst
Pipeline Burst
Asynchronous
Installed SRAM Type: Asynchronous
Speed: Unknown
Error Correction Type: Unknown
System Type: Unknown
Associativity: Unknown
Handle 0x000E, DMI type 7, 19 bytes
Cache Information
Socket Designation: L2 Cache
Configuration: Enabled, Socketed, Level 2
Operational Mode: Write Back
Location: External
Installed Size: 0 kB
Maximum Size: 512 kB
Supported SRAM Types:
Burst
Pipeline Burst
Asynchronous
Installed SRAM Type: None
Speed: Unknown
Error Correction Type: Unknown
System Type: Unknown
Associativity: Unknown
3. Jak získat informace o paměti
Jak získám informace o Paměti v systému a kolik paměti systém podporuje? Následující příkaz ukazuje, že systém podporuje maximálně 4 GB RAM.
[root@tecmint ~]# dmidecode -t 16
dmidecode 2.11
SMBIOS version fixup (2.31 -> 2.3).
SMBIOS 2.3 present.
Handle 0x001D, DMI type 16, 15 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None
Maximum Capacity: 4 GB
Error Information Handle: Not Provided
Number Of Devices: 4
Poznámka: Ze seznamu klíčových slov jsou ID informací souvisejících s pamětí 5, 6, 16 a 17.
4. Jak získám informace o systému BIOS?
Chcete-li získat informace o systému BIOS, spusťte následující příkaz s možností ‘-t‘.
[root@tecmint ~]# dmidecode -t bios
dmidecode 2.11
SMBIOS version fixup (2.31 -> 2.3).
SMBIOS 2.3 present.
Handle 0x0000, DMI type 0, 20 bytes
BIOS Information
Vendor: Phoenix Technologies LTD
Version: 6.00
Release Date: 12/06/2006
Address: 0xE78A0
Runtime Size: 100192 bytes
ROM Size: 64 kB
Characteristics:
ISA is supported
PCI is supported
PC Card (PCMCIA) is supported
PNP is supported
APM is supported
BIOS is upgradeable
BIOS shadowing is allowed
ESCD support is available
USB legacy is supported
Smart battery is supported
BIOS boot specification is supported
5. Jak získám číslo výrobce, modelu a sériové číslo?
Chcete-li získat informace o výrobci, modelu a sériovém čísle systému, použijte následující příkaz, jak je uvedeno níže.
[root@tecmint ~]# dmidecode -t system
dmidecode 2.11
SMBIOS 2.4 present.
Handle 0x0001, DMI type 1, 27 bytes
System Information
Manufacturer: LENOVO
Product Name: 9637C76
Version: ThinkCentre M55e
Serial Number: L9BT188
UUID: 8015D37A-2F82-DC11-A3FB-8C6E4EBAD5CE
Wake-up Type: AC Power Restored
SKU Number: Not Specified
Family: Not Specified
Handle 0x000F, DMI type 12, 5 bytes
System Configuration Options
Option 1: Jumper settings can be described here.
Handle 0x0010, DMI type 15, 29 bytes
System Event Log
Area Length: 432 bytes
Header Start Offset: 0x0000
Header Length: 16 bytes
Data Start Offset: 0x0010
Access Method: General-purpose non-volatile data functions
Access Address: 0x0000
Status: Valid, Not Full
Change Token: 0x0000001A
Header Format: Type 1
Supported Log Type Descriptors: 3
Descriptor 1: POST error
Data Format 1: POST results bitmap
Descriptor 2: Single-bit ECC memory error
Data Format 2: Multiple-event
Descriptor 3: Multi-bit ECC memory error
Data Format 3: Multiple-event
Handle 0x0017, DMI type 23, 13 bytes
System Reset
Status: Enabled
Watchdog Timer: Present
Boot Option: Do Not Reboot
Boot Option On Limit: Do Not Reboot
Reset Count: Unknown
Reset Limit: Unknown
Timer Interval: Unknown
Timeout: Unknown
Handle 0x001F, DMI type 32, 20 bytes
System Boot Information
Status:
Chcete-li se dozvědět více o dmidecode, spusťte „man dmidecode“ z terminálu nebo příkazového řádku.
Přečtěte si také: 10 nástrojů příkazového řádku pro získání informací o hardwaru Linuxu